|
|
Current location: Lasers
457nm laser (1-30mW)
Specifications: |
Model |
|
JGI-457-B |
Output Power |
|
1-30mW |
Wavelength |
|
457±1nm |
Operation Mode |
|
CW, Near TEM00 |
Power stability after warm-up |
|
<1%, <3%, <5% (over 2/4/8 hours) |
Warm-up time |
|
<10 minutes |
M2 factor |
|
<2. 0 |
Beam Divergence (1/e2, Full Angle) |
|
< 1.5mrad |
Beam diameter at the aperture |
|
~3. 0mm |
Beam height from base plate (mm) |
|
45mm |
Polarization ratio |
|
>100:1 |
Point stability after warm-up |
|
<0.05mrad |
Operating temperature |
|
10-35℃ |
Dimensions of laser head |
212 × 88 × 74mm |
Power supply |
|
JGI-PS-500 |
Dimensions of power supply |
|
238 x 146 x 94mm |
Modulation |
|
TTL Modulation >10KHz or Analog Modulation >2Khz |
Expect life time |
10000 hours |
Warranty time |
1 year |
457nm laser (50-500mW)
Specifications: |
Model |
|
JGI-457-B |
Output Power |
|
50-500mW |
Wavelength |
|
457±1nm |
Operation Mode |
|
CW, Near TEM00 |
Power stability after warm-up |
|
<1%, <3%, <5% (over 2/4/8 hours) |
Warm-up time |
|
<10 minutes |
M2 factor |
|
<2. 0 |
Beam Divergence (1/e2, Full Angle) |
|
< 1.5mrad |
Beam diameter at the aperture |
|
~3. 0mm |
Beam height from base plate (mm) |
|
45mm |
Polarization ratio |
|
>100:1 |
Point stability after warm-up |
|
<0.05mrad |
Operating temperature |
|
10-35℃ |
Dimensions of laser head |
212 × 88 × 74mm |
Power supply |
|
JGI-PS-500 |
Dimensions of power supply |
|
238 x 146 x 94mm |
Modulation |
|
TTL Modulation >10KHz or Analog Modulation >2Khz |
Expect life time |
10000 hours |
Warranty time |
1 year |
457nm laser (600-1000mW)
Specifications: |
Model |
|
JGI-457-B |
Output Power |
|
600-1000mW |
Wavelength |
|
457±1nm |
Operation Mode |
|
CW, TEM01 |
Power stability after warm-up |
|
<1%, <3%, <5% (over 2/4/8 hours) |
Warm-up time |
|
<10 minutes |
M2 factor |
|
<2. 0 |
Beam Divergence (1/e2, Full Angle) |
|
< 1.5mrad |
Beam diameter at the aperture |
|
~3. 0mm |
Beam height from base plate (mm) |
|
45mm |
Polarization ratio |
|
>100:1 |
Point stability after warm-up |
|
<0.05mrad |
Operating temperature |
|
10-35℃ |
Dimensions of laser head |
212 × 88 × 74mm |
Power supply |
|
JGI-PS-500 |
Dimensions of power supply |
|
238 x 146 x 94mm |
Modulation |
|
TTL Modulation >10KHz or Analog Modulation >2Khz |
Expect life time |
10000 hours |
Warranty time |
1 year |
457nm laser (1200-2000mW)
Specifications: |
Model |
|
JGI-457-B |
Output Power |
|
1200-2000mW |
Wavelength |
|
457±1nm |
Operation Mode |
|
CW, near TEM01 |
Power stability after warm-up |
|
<1%, <3%, <5% (over 2/4/8 hours) |
Warm-up time |
|
<10 minutes |
M2 factor |
|
<2. 0 |
Beam Divergence (1/e2, Full Angle) |
|
< 2.0mrad |
Beam diameter at the aperture |
|
~4. 0mm |
Beam height from base plate (mm) |
|
93.5mm |
Polarization ratio |
|
>100:1 |
Point stability after warm-up |
|
<0.05mrad |
Noise of amplitude (rms, 1~20MHz) |
~30% |
Operating temperature |
|
10-35℃ |
Dimensions of laser head |
333 × 140 × 125mm |
Power supply |
|
JGI-PS-800 |
Dimensions of power supply |
|
300 x 162 x 134mm |
Modulation |
|
TTL Modulation >10KHz or Analog Modulation >2Khz |
Expect life time |
10000 hours |
Warranty time |
1 year |
457nm laser (3000-9000mW)
Specifications: |
Model |
|
JGI-457-B |
Output Power |
|
3000-9000mW |
Wavelength |
|
457±1nm |
Operation Mode |
|
CW, near TEM01 |
Power stability after warm-up |
|
<1%, <3%, <5% (over 2/4/8 hours) |
Warm-up time |
|
<10 minutes |
M2 factor |
|
<2. 0 |
Beam Divergence (1/e2, Full Angle) |
|
< 2.0mrad |
Beam diameter at the aperture |
|
~4. 0mm |
Beam height from base plate (mm) |
|
93.5mm |
Polarization ratio |
|
>100:1 |
Point stability after warm-up |
|
<0.05mrad |
Noise of amplitude (rms, 1~20MHz) |
~30% |
Operating temperature |
|
10-35℃ |
Dimensions of laser head |
333 × 140 × 125mm |
Power supply |
|
JGI-PS-800 |
Dimensions of power supply |
|
300 x 162 x 134mm |
Modulation |
|
TTL Modulation >10KHz or Analog Modulation >2Khz |
Expect life time |
10000 hours |
Warranty time |
1 year |
|
|