|
|
Current location: Lasers
DPSS 473nm Blue Laser Module (1-100mW)
Model |
JGI-B473-T |
Output Power @ 25 ℃ |
1-100mW |
Wavelength |
473±1nm |
Operation Mode |
CW, TEM00 |
Power stability after warm-up |
<1%, <3%, <5% (over 2/4/8 hours) |
Warm-up time |
< 10 minutes |
M2 factor |
<1. 2 |
Beam Divergence (1/e2, Full Angle) |
< 1.5mrad |
Beam diameter at the aperture |
~2.0mm |
Beam height from base plate (mm) |
24. 8mm |
Polarization ratio |
>100:1 (0 or 90 degree) |
Noise of amplitude (rms, 1~20MHz) |
~30% |
Point stability after warm-up |
<0.05mrad |
Operating temperature |
10℃~35℃ |
Dimensions of Laser head |
142 × 73 × 46mm |
Power supply |
JGI-PS-300 |
Input Voltage |
90-264VAC or 5V DC |
Modulation |
TTL Modulation or Analog Modulation |
Expect life time |
10000 hours |
Warranty time |
1 year |
DPSS 473nm Blue Laser Module (150-200mW)
Model |
JGI-B473-T |
Output Power @ 25 ℃ |
150-200mW |
Wavelength |
473±1nm |
Operation Mode |
CW, TEM00 |
Power stability after warm-up |
<1%, <3%, <5% (over 2/4/8 hours) |
Warm-up time |
< 10 minutes |
M2 factor |
<1. 2 |
Beam Divergence (1/e2, Full Angle) |
< 1.5mrad |
Beam diameter at the aperture |
~2.0mm |
Beam height from base plate (mm) |
24. 8mm |
Polarization ratio |
>100:1 (0 or 90 degree) |
Noise of amplitude (rms, 1~20MHz) |
~30% |
Point stability after warm-up |
<0.05mrad |
Operating temperature |
10℃~35℃ |
Dimensions of Laser head |
142 × 73 × 46mm |
Power supply |
JGI-PS-300 |
Input Voltage |
90-264VAC or 5V DC |
Modulation |
TTL Modulation or Analog Modulation |
Expect life time |
10000 hours |
Warranty time |
1 year |
DPSS 473nm Blue Laser Module (300--600mW)
Model |
JGI-B473-T |
Output Power @ 25 ℃ |
300-600mW |
Wavelength |
473±1nm |
Operation Mode |
CW, near TEM00 |
Power stability after warm-up |
<1%, <3%, <5% (over 2/4/8 hours) |
Warm-up time |
< 10 minutes |
M2 factor |
<2. 0 |
Beam Divergence (1/e2, Full Angle) |
< 1.5mrad |
Beam diameter at the aperture |
~3mm |
Beam height from base plate (mm) |
29mm |
Polarization ratio |
>100:1 |
Noise of amplitude (rms, 1~20MHz) |
~30% |
Point stability after warm-up |
<0.05mrad |
Operating temperature |
10℃~35℃ |
Dimensions of Laser head |
156 × 77 × 60mm |
Power supply |
JGI-PS-500 |
Input Voltage |
90-264VAC |
Modulation |
TTL Modulation or Analog Modulation |
Expect life time |
10000 hours |
Warranty time |
1 year |
DPSS 473nm Blue Laser Module (800-1000mW)
Model |
JGI-B473-T |
Output Power @ 25 ℃ |
800-1000mW |
Wavelength |
473±1nm |
Operation Mode |
CW, near TEM00 |
Power stability after warm-up |
<1%, <3%, <5% (over 2/4/8 hours) |
Warm-up time |
< 10 minutes |
M2 factor |
<2. 0 |
Beam Divergence (1/e2, Full Angle) |
< 1.5mrad |
Beam diameter at the aperture |
~3mm |
Beam height from base plate (mm) |
29mm |
Polarization ratio |
>100:1 |
Noise of amplitude (rms, 1~20MHz) |
~30% |
Point stability after warm-up |
<0.05mrad |
Operating temperature |
10℃~35℃ |
Dimensions of Laser head |
156 × 77 × 60mm |
Power supply |
JGI-PS-500 |
Input Voltage |
90-264VAC |
Modulation |
TTL Modulation or Analog Modulation |
Expect life time |
10000 hours |
Warranty time |
1 year |
|
|