|
|
Current location: Lasers
Specifications: |
Model |
JGI-556-G |
Output Power @ 25 ℃ |
1~100mW |
Wavelength |
556±1nm |
Operation Mode |
CW TEM00 |
Beam height from base plate (mm) |
24. 8mm |
Linear Polarization |
>100:1(0 or 90 degree) |
Beam Diameter at the aperture |
~2. 0mm |
Beam Divergence (1/e2, Full Angle) |
<1.5mrad |
Power Stability after warm-up |
<1%, <3%, <5% (over 2/4/8 hours) |
M2 factor |
<1.2mm |
Warm-up time |
<10 minutes |
Dimension of laser head |
142 x 73 x 46mm |
Power Supply |
JGI-PS-100 |
JGI-PS-300 |
Input Voltage |
90-264VAC or 5VDC, 50/60Hz |
Dimension of Power Supply |
100 x 60 x 56mm |
130 x 120 x 62mm |
Modulation |
TTL Modulation >5KHz or analog Modulation >2KHz |
Operating Temperature |
10℃~35℃ |
Expect life time |
10000 hours |
Warranty time |
1 year |
DPSS 556nm Reseda Laser(150-300mW)
Specifications: |
Model |
JGI-556-G |
Output Power @ 25 ℃ |
150~300mW |
Wavelength |
556±1nm |
Operation Mode |
CW TEM00 |
Beam height from base plate (mm) |
24. 8mm |
Linear Polarization |
>100:1(0 or 90 degree) |
Beam Diameter at the aperture |
~2. 0mm |
Beam Divergence (1/e2, Full Angle) |
<1.5mrad |
Power Stability after warm-up |
<1%, <3%, <5% (over 2/4/8 hours) |
M2 factor |
<1.2mm |
Warm-up time |
<10 minutes |
Dimension of laser head |
142 x 73 x 46mm |
Power Supply |
JGI-PS-100 |
JGI-PS-300 |
Input Voltage |
90-264VAC or 5VDC, 50/60Hz |
Dimension of Power Supply |
100 x 60 x 56mm |
130 x 120 x 62mm |
Modulation |
TTL Modulation >5KHz or analog Modulation >2KHz |
Operating Temperature |
10℃~35℃ |
Expect life time |
10000 hours |
Warranty time |
1 year |
|
|