|
|
Current location: Lasers
DPSS 532nm Green Laser Module (APC control without TEC,1-100mW)
Specifications:
|
Model |
JGI-532-M-001 |
JGI-532-M-5 |
JGI-532-M-7 |
JGI-532-M-10 |
Output Power @ 25 ℃ |
>1mW |
>5mW |
>7mW |
>10mW |
Operation Mode |
CW @ 532nm, TEM00 |
Linewidth |
<0.1nm |
Beam Diameter at the aperture |
<1.2mm |
Beam Divergence (1/e2, Full Angle) |
<1.5mrad |
Power Stability after warm-up |
<±10% (over 1 hours) |
Point Stability after warm-up |
0.05mrad |
Warm-up time |
<5 minutes |
Dimensions of Laser |
Dia.8 x 65mm |
Operating Temperature |
23℃±2℃ |
Input Voltage |
3~5VDC |
Expect life time |
>3000 hours |
Warranty time |
6 months |
Specifications: |
Model |
JGI-532-M-5 |
JGI-532-M-20 |
JGI-532-M-50 |
JGI-532-M-100 |
Output Power @ 25 ℃ |
>5mW |
>20mW |
>50mW |
>100mW |
Operation Mode |
CW @ 532nm, TEM00 |
Linewidth |
<0.1nm |
Beam Diameter at the aperture |
<1.6mm |
Beam Divergence (1/e2, Full Angle) |
<1.8mrad |
Power Stability after warm-up |
<±10% (over 1 hours) |
Point Stability after warm-up |
0.05mrad |
Warm-up time |
<5 minutes |
Dimensions of Laser |
Dia.12 x 65mm |
Operating Temperature |
23℃±2℃ |
Input Voltage |
3VDC |
Expect life time |
>3000 hours |
Warranty time |
6 months |
DPSS 532nm Green Lasers (without TEC-5-50mW)
Specifications: |
Model |
|
JGI-532-5F |
JGI-532-10F |
JGI-532-30F |
JGI-532-50F |
Output Power @ 25 ℃ |
|
>5mW |
>10mW |
>30mW |
>50mW |
Operating Current |
|
<450mA |
<500mA |
<550mA |
<600mA |
Operation Mode |
CW @ 532nm, TEM00 |
Linewidth |
<0.1nm |
Beam Diameter at the aperture |
<1.2mm |
Beam Divergence (1/e2, Full Angle) |
<1.2mrad |
Power Stability after warm-up |
<±10% (over 2 hours) |
Point Stability after warm-up |
0.05mrad |
Warm-up time |
<15 minutes |
Dimension of laser head |
65 x 30 x 30mm |
Power Supply |
JGI-PS-900 |
Input Voltage |
85~250VAC, 50/60Hz |
Modulation |
TTL Modulation >5KHz or Analog Modulation >2Khz |
Operating Temperature |
10℃ ~ 30℃ |
Dimensions of power supply |
100 x 80 x 30mm |
Beam Roundness |
>95% |
Expect life time |
>5000 hours |
Warranty time? |
1 year |
DPSS 532nm Green Laser(10-200mW)
Specifications: |
Model |
JGI-532-T |
Output Power @ 25 ℃ |
10-200mW |
Wavelength |
CW 532nm |
Operation Mode |
TEM00 |
Linewidth |
<0.1nm |
Linear Polarization |
>100:1 |
Beam Diameter at the aperture |
<2mm |
Beam Divergence (1/e2, Full Angle) |
<1.5mrad |
Power Stability after warm-up |
<1%, <3%, <5% (over 2/4/8 hours) |
M2 factor |
<1.2mm |
Warm-up time |
<15 minutes |
Dimension of laser head |
102 x 39 x 39mm |
Power Supply |
JGI-PS-200 |
Input Voltage |
85~250VAC, 50/60Hz |
Beam Roundness |
>95% |
Modulation |
TTL Modulation >5KHz or analog Modulation >2KHz |
Operating Temperature |
10℃~30℃ |
Dimensions of power supply |
174 x 75 x 40mm |
Expect life time |
10000 hours |
Warranty time |
1 year |
DPSS 532nm Green Laser(300-500mW)
Specifications: |
Model |
JGI-532-T |
Output Power @ 25 ℃ |
300~500mW |
Wavelength |
532nm |
Operation Mode |
CW TEM00 |
Beam height from base plate (mm) |
24. 8mm |
Linear Polarization |
>100:1(0 or 90 degree) |
Beam Diameter at the aperture |
~2. 0mm |
Beam Divergence (1/e2, Full Angle) |
<1.5mrad |
Power Stability after warm-up |
<1%, <3%, <5% (over 2/4/8 hours) |
M2 factor |
<1.2mm |
Warm-up time |
<10 minutes |
Dimension of laser head |
142 x 73 x 46mm |
Power Supply |
JGI-PS-100 |
JGI-PS-300 |
Input Voltage |
90-264VAC or 5VDC, 50/60Hz |
Dimension of Power Suply |
100 x 60 x 56mm |
130 x 120 x 62mm |
Modulation |
TTL Modulation >5KHz or analog Modulation >2KHz |
Operating Temperature |
10℃~35℃ |
Expect life time |
10000 hours |
Warranty time |
1 year |
DPSS 532nm Green Laser(600-1500mW)
Specifications: |
Model |
JGI-532-T |
Output Power @ 25 ℃ |
600~1500mW |
Wavelength |
532nm |
Operation Mode |
CW, near TEM00 |
Beam height from base plate (mm) |
29mm |
Linear Polarization |
>100:1 |
Beam Diameter at the aperture |
~3. 0mm |
Beam Divergence (1/e2, Full Angle) |
<2.0mrad |
Power Stability after warm-up |
<1%, <3%, <5% (over 2/4/8 hours) |
M2 factor |
<2.0mm |
Warm-up time |
<10 minutes |
Dimension of laser head |
156 x 77 x 60mm |
Power Supply |
JGI-PS-500 |
Dimension of Power Suply |
238 x 146 x 94mm |
Input Voltage |
90-264VAC, 50/60Hz |
Modulation |
TTL Modulation >5KHz or analog Modulation >2KHz |
Operating Temperature |
10℃~35℃ |
Expect life time |
10000 hours |
Warranty time |
1 year |
DPSS 532nm Green Laser(2000-3000mW)
Specifications: |
Model |
JGI-532-T |
Output Power @ 25 ℃ |
2000~3000mW |
Wavelength |
532nm |
Operation Mode |
CW, near TEM00 |
Beam height from base plate (mm) |
45mm |
Linear Polarization |
>100:1 |
Beam Diameter at the aperture |
~3. 0mm |
Beam Divergence (1/e2, Full Angle) |
<2.0mrad |
Power Stability after warm-up |
<1%, <3%, <5% (over 2/4/8 hours) |
M2 factor |
<2.0mm |
Warm-up time |
<10 minutes |
Dimension of laser head |
212 x 88 x 74mm |
Power Supply |
JGI-PS-500 |
Dimension of Power Suply |
238 x 146 x 94mm |
Input Voltage |
90-264VAC, 50/60Hz |
Modulation |
TTL Modulation >5KHz or analog Modulation >2KHz |
Operating Temperature |
10℃~35℃ |
Expect life time |
10000 hours |
Warranty time |
1 year |
DPSS 532nm Green Laser(4000-8000mW)
Specifications: |
Model |
JGI-532-T |
Output Power @ 25 ℃ |
4000~8000mW |
Wavelength |
532nm |
Operation Mode |
CW, near TEM00 |
Beam height from base plate (mm) |
93.5mm |
Linear Polarization |
>100:1 |
Beam Diameter at the aperture |
~4.0mm |
Beam Divergence (1/e2, Full Angle) |
<2.0mrad |
Power Stability after warm-up |
<1%, <3%, <5% (over 2/4/8 hours) |
M2 factor |
<2.0mm |
Warm-up time |
<10 minutes |
Dimension of laser head |
333 x 140 x 125mm |
Power Supply |
JGI-PS-800 |
Dimension of Power Suply |
300 x 162 x 134mm |
Input Voltage |
90-264VAC, 50/60Hz |
Modulation |
TTL Modulation >5KHz or analog Modulation >2KHz |
Operating Temperature |
10℃~35℃ |
Expect life time |
10000 hours |
Warranty time |
1 year |
DPSS 532nm Green Laser(10000-1500mW)
Model |
JGI-532-T |
Output Power @ 25 ℃ |
10000~15000mW |
Wavelength |
532nm |
Operation Mode |
CW, near TEM00 |
Beam height from base plate (mm) |
93.5mm |
Linear Polarization |
>100:1 |
Beam Diameter at the aperture |
~4.0mm |
Beam Divergence (1/e2, Full Angle) |
<2.0mrad |
Power Stability after warm-up |
<1%, <3%, <5% (over 2/4/8 hours) |
M2 factor |
<2.0mm |
Warm-up time |
<10 minutes |
Dimension of laser head |
333 x 140 x 125mm |
Power Supply |
JGI-PS-800 |
Dimension of Power Suply |
300 x 162 x 134mm |
Input Voltage |
90-264VAC, 50/60Hz |
Modulation |
TTL Modulation >5KHz or analog Modulation >2KHz |
Operating Temperature |
10℃~35℃ |
Expect life time |
10000 hours |
Warranty time |
1 year | |
|