|
|
Current location: Lasers
660nm Diode Collimated Red Laser |
660nm Line Laser (1-150mW)
Specifications: |
Model |
JGI-660-LM-L |
Output Power @ 25 ℃ |
1-150mW |
Wavelengths |
660nm |
Dimension |
Φ12mm, length 48mm and Φ16mm, length 70mm |
Supply voltage |
DC3~5V |
Operating current |
<250mA |
Line Angle |
30°,45°,60,°90,°110°,130° |
Line Width |
<1mm (1M) |
Optics |
glass lens both sides AR coated |
Wire length |
150mm |
Operating temperature |
-10℃~+40℃ |
Storage temperature |
-40℃~+80℃ |
Expect life time |
>3000 hours |
Warranty time |
6 months |
660nm Cross Line (1-150mW)
Specifications: |
Model |
JGI-660-LM-CL |
Output Power @ 25 ℃ |
1-150mW |
Wavelengths |
660nm |
Dimension |
Φ12mm, length 48mm or Φ16mm, length 70mm |
Supply voltage |
DC3~5V |
Operating current |
<250mA |
Line Angle |
60°x 60° or 90°x 90° or 110° x 110° |
Line Width |
<1mm x 1mm (1M) |
Optics |
glass lens both sides AR coated |
Wire length |
150mm |
Operating temperature |
-10℃~+40℃ |
Storage temperature |
-40℃~+80℃ |
Expect life time |
>3000 hours |
Warranty time |
6 months |
660nm Laser Module (1-80mW)
Specifications: |
Model |
JGI-660-LM-T |
Output Power @ 25 ℃ |
1-80mW |
Wavelength |
660nm |
Dimension |
Φ8x18mm,Φ8x30mm,Φ12x37mm,
Φ14x70mm,Φ16x110mm,20x20x50mm |
Supply voltage |
DC3~5V |
Operating current |
<260mA |
Beam parameters |
Elliptical <10%, Beam Dia <2mm |
Beam divergence (1/e2, Full Angle) |
<1.5mrad |
Point Stability after warm-up |
0.05mrad |
Power Stability after warm-up |
<5% (over 2 hours) |
Optics |
glass lens both sides AR coated |
Wire length |
150mm |
Operating temperature |
-10℃~+40℃ |
Storage temperature |
-40℃~+80℃ |
Expect life time |
>3000 hours |
Warranty time |
6 months |
660nm Laser Module (100-180mW)
Model |
JGI-660-LM |
Output Power @ 25 ℃ |
100-180mW |
Wavelength |
660nm |
Dimension |
Φ8x18mm,Φ8x30mm,Φ12x37mm,Φ14x70mm,Φ16x110mm,20x20x50mm |
Supply voltage |
DC3~5V |
Operating current |
<260mA |
Beam parameters |
Elliptical <10%, Beam Dia <2mm |
Beam divergence (1/e2, Full Angle) |
<1.5mrad |
Point Stability after warm-up |
0.05mrad |
Power Stability after warm-up |
<5% (over 2 hours) |
Optics |
glass lens both sides AR coated |
Wire length |
150mm |
Operating temperature |
-10℃~+40℃ |
Storage temperature |
-40℃~+80℃ |
Expect life time |
>5000 hours |
Warranty time |
1 year |
660nm Laser (200-1000mW)
Model |
JGI-660-LM-T |
Output Power @ 25 ℃ |
200-1000mW |
Wavelength |
660±5nm |
Transverse mode |
TE00 |
Operating mode |
CW |
Power Stability after warm-up |
<1%, <3%, <5% (over 2/4/8 hours) |
Warm-up time |
<5 minutes |
Beam divergence (1/e2, Full Angle) |
<3. 0mrad |
Beam diameter at the aperture |
~5×8mm |
M2 factor |
<20 |
Point stability after warm-up |
<0.05mrad |
Operating temperature |
10-35 ℃ |
Dimensions of Laser head |
142 x 73 x 46mm |
Power Supply |
JGI-PS-300 |
Dimensions of Power Supply |
133 x 130 x 65mm |
Modulation |
TTL Modulation or Analog Modulation |
Expect life time |
10000 hours |
Warranty time |
1 year |
660nm Lasers (1200-1500mW)
Specifications: |
Model |
JGI-660-LM-T |
Output Power @ 25 ℃ |
1200-1500mW |
Wavelengths |
660±5nm |
Transverse mode |
near TE00 |
Operating Mode |
CW |
Power Stability after warm-up |
<1%, <3%, <5% (over 2/4/8 hours) |
Warm-up time |
<5 minutes |
Beam divergence (1/e2, Full Angle) |
<3mrad |
Beam diameter at the aperture |
~5×8mm |
M2 factor |
<20 |
Point stability after warm-up |
<0.05mrad |
Beam height from base plate (mm) |
28. 5mm |
Polarization ratio |
>50:1 |
Operating temperature |
10-35 ℃ |
Dimensions of Laser head |
136 x 73 x 50mm |
Power Supply |
JGI-PS-300 |
Dimensions of Power Supply |
133 x 130 x 65mm |
Modulation |
TTL Modulation or Analog Modulation |
Expect life time |
10000 hours |
Warranty time |
1 year | |
|
|