|
|
Current location: Lasers
DPSS 1342nm Infrared Laser |
1342nm Lasers (1-1000mW)
Specifications: |
Model |
JGI-1342-T |
Output Power @ 25 ℃ |
1-1000mW |
Wavelength |
1342+/-1nm |
Operation Mode |
CW, TEM00 |
Power stability after warm-up |
<1,<3%,<5% (over 2/4/8 hours) |
M2 factor |
< 1.5 |
Warm-up time |
< 10 minutes |
Beam divergence (1/e2, Full Angle) |
< 1.5mrad |
Beam diameter at the aperture |
~2.0mm |
Beam height from base plate (mm) |
24. 8mm |
Point stability after warm-up |
<0.05mrad |
Operating temperature |
10℃~35℃ |
Dimension of laser head |
142 × 73 × 46mm |
Power Supply |
JGI-PS-300 |
Dimension of power supply |
130 × 120 × 62mm |
Modulation |
TTL Modulation >5KHz or analog Modulation >2KHz |
Expect life time |
10000 hours |
Warranty time |
1 year |
1342nm Lasers (1200-1800mW)
Specifications: |
Model |
JGI-1342-T |
Output Power @ 25 ℃ |
1200-1800mW |
Wavelength |
1342+/-1nm |
Operation Mode |
CW, near TEM00 |
Power stability after warm-up |
<1%, <3%, <5% (over 2/4/8 hours) |
Warm-up time |
<10 minutes |
M2 factor |
<2. 0 |
Beam Divergence (1/e2, Full Angle) |
< 2.0mrad |
Beam diameter at the aperture |
~3.0mm |
Beam height from base plate (mm) |
29mm |
Polarization ratio |
>100:1 |
Point stability after warm-up |
<0.05mrad |
Operating temperature |
10-35℃ |
Dimensions of laser head |
156 × 77 ×60mm |
Power supply |
JGI-PS-500 |
Dimensions of power supply |
238 x 146 x 94mm |
Modulation |
TTL Modulation >5KHz or Analog Modulation >2Khz |
Expect life time |
10000 hours |
Warranty time |
1 year | |
1342nm Lasers (2W-3W)
Specifications: |
Model |
JGI-1342-T |
Output Power @ 25 ℃ |
2000-3000mW |
Wavelength |
1342+/-1nm |
Operation Mode |
CW, near TEM00 |
Power stability after warm-up |
<1%, <3%, <5% (over 2/4/8 hours) |
Warm-up time |
<10 minutes |
M2 factor |
<2. 0 |
Beam Divergence (1/e2, Full Angle) |
< 2.0mrad |
Beam diameter at the aperture |
~3.0mm |
Beam height from base plate (mm) |
29mm |
Polarization ratio |
>100:1 |
Point stability after warm-up |
<0.05mrad |
Operating temperature |
10-35℃ |
Dimensions of laser head |
156 × 77 ×60mm |
Power supply |
JGI-PS-500 |
Dimensions of power supply |
238 x 146 x 94mm |
Modulation |
TTL Modulation >5KHz or Analog Modulation >2Khz |
Expect life time |
10000 hours |
Warranty time |
1 year |
1342nm Lasers (4-6W)
Specifications: |
Model |
JGI-1342-T |
Output Power @ 25 ℃ |
4-6W |
Wavelength |
1342+/-1nm |
Operation Mode |
CW, TEM00 |
Spectral line width |
<0.1nm |
Power stability after warm-up |
<1,<3%,<5% (over 2/4/8 hours) |
Warm-up time |
< 10 minutes |
M2 factor |
< 2 |
Beam divergence (1/e2, Full Angle) |
<2.0mrad |
Beam diameter at the aperture |
<3.0mm |
Point stability after warm-up |
<0.05mrad |
Polarization ratio |
>100:1 |
Ellipticity of beam |
< 10% |
Operating temperature |
10-35℃ |
Dimension of Laser head |
333 x 140 x 125mm |
Power supply |
JGI-PS-800 |
Dimension of power supply |
300 x 162 x 134mm |
Expect life time |
10000 hours |
Warranty time |
1 year |
Modulation |
TTL Modulation >5KHz or analog Modulation >2KHz | |
|
|