|
|
Current location: Lasers
914nm DPSS Infrared Laser |
914nm Lasers (100-500mW)
Specifications: |
Model |
JGI-D914-T |
Output Power @ 25 ℃ |
100~500mW |
Wavelength |
914±1nm |
Operation Mode |
CW, Near TEM00 |
Beam height from base plate (mm) |
24. 8mm |
Linear Polarization |
>100:1(0 or 90 degree) |
Beam Diameter at the aperture |
~2. 0mm |
Beam Divergence (1/e2, Full Angle) |
<1.5mrad |
Power Stability after warm-up |
<1%, <3%, <5% (over 2/4/8 hours) |
M2 factor |
<1.2 |
Warm-up time |
<10 minutes |
Dimension of laser head |
142 x 73 x 46mm |
Power Supply |
JGI-PS-100 |
JGI-PS-300 |
Input Voltage |
90-264VAC or 5VDC, 50/60Hz |
Dimension of Power Suply |
100 x 60 x 56mm |
130 x 120 x 62mm |
Modulation |
TTL Modulation >5KHz or analog Modulation >2KHz |
Operating Temperature |
10℃~35℃ |
Expect life time |
10000 hours |
Warranty time |
1 year |
914nm Lasers (600-1200mW)
Specifications: |
Model |
JGI-D914-T |
Output Power @ 25 ℃ |
600~1200mW |
Wavelength |
914±1nm |
Operation Mode |
CW, near TEM00 |
Beam height from base plate (mm) |
29mm |
Linear Polarization |
>100:1 |
Beam Diameter at the aperture |
~3. 0mm |
Beam Divergence (1/e2, Full Angle) |
<2.0mrad |
Power Stability after warm-up |
<1%, <3%, <5% (over 2/4/8 hours) |
M2 factor |
<2.0 |
Warm-up time |
<10 minutes |
Dimension of laser head |
156 x 77 x 60mm |
Power Supply |
JGI-PS-500 |
Dimension of Power Supply |
238 x 146 x 94mm |
Input Voltage |
90-264VAC, 50/60Hz |
Modulation |
TTL Modulation >5KHz or analog Modulation >2KHz |
Operating Temperature |
10℃~35℃ |
Expect life time |
10000 hours |
Warranty time |
1 year |
914nm Lasers (1500-2500mW)
Specifications: |
Model |
JGI-D914-T |
Output Power @ 25 ℃ |
1500~2500mW |
Wavelength |
914±1nm |
Operation Mode |
CW, near TEM00 |
Beam height from base plate (mm) |
45mm |
Linear Polarization |
>100:1 |
Beam Diameter at the aperture |
~3. 0mm |
Beam Divergence (1/e2, Full Angle) |
<2.0mrad |
Power Stability after warm-up |
<1%, <3%, <5% (over 2/4/8 hours) |
M2 factor |
<2.0 |
Warm-up time |
<10 minutes |
Dimension of laser head |
212 x 88 x 74mm |
Power Supply |
JGI-PS-500 |
Dimension of Power Supply |
238 x 146 x 94mm |
Input Voltage |
90-264VAC, 50/60Hz |
Modulation |
TTL Modulation >5KHz or analog Modulation >2KHz |
Operating Temperature |
10℃~35℃ |
Expect life time |
10000 hours |
Warranty time |
1 year |
914nm Lasers (3000-5000mW)
Specifications: |
Model |
JGI-D914-T |
Output Power @ 25 ℃ |
3000~5000mW |
Wavelength |
914±1nm |
Operation Mode |
CW, near TEM00 |
Beam height from base plate (mm) |
93.5mm |
Linear Polarization |
>100:1 |
Beam Diameter at the aperture |
~4.0mm |
Beam Divergence (1/e2, Full Angle) |
<2.0mrad |
Power Stability after warm-up |
<1%, <3%, <5% (over 2/4/8 hours) |
M2 factor |
<2.0 |
Warm-up time |
<10 minutes |
Dimension of laser head |
333 x 140 x 125mm |
Power Supply |
JGI-PS-800 |
Dimension of Power Supply |
300 x 162 x 134mm |
Input Voltage |
90-264VAC, 50/60Hz |
Modulation |
TTL Modulation >5KHz or analog Modulation >2KHz |
Operating Temperature |
10℃~35℃ |
Expect life time |
10000 hours |
Warranty time |
1 year | |
|